Notes On Track Lights

May 21, 2020

One, try not to switch frequently when using led track lights, because the current through the filament is greater than the current during normal operation at the moment of frequent startup, which makes the temperature of the filament rise sharply and accelerates sublimation, which will greatly reduce its use Life, so we should try our best to reduce the switch of led track light fixtures.

Second, during the installation of track lights, you should avoid touching the surface of the lamp with your hands, and also avoid installing in a place with a corrosive gas at the heat source. If these are installed, it will affect the service life of the track lights. of

Third, during cleaning and maintenance, please pay attention not to change the structure of the lamp, nor to replace some parts inside the led track light lamp. After the cleaning and maintenance, the lamp should be installed as is, and the lamp parts should not be missed or misinstalled. It should also be noted that moisture can easily cause rust and discoloration of track light components. We should prevent moisture intrusion and avoid rust damage or leakage short circuit.

4. Replace the aging lamp in time according to the light source parameters provided by the sign Unsafe phenomena such as burnout of the ballast occurred. It is best not to wash the LED track lights with water, as long as it is wiped with a dry cloth dampened with water. If you accidentally touch the water, try to dry it as much as possible. Never wipe it with a wet cloth immediately after turning on the light.

Related News

Product Recommended

  • 8W Trimless Recessed ...
  • 20W IP65 Surface Moun...
  • 30W Linear Pendant Li...